Touchless 230V SmartHome sensor. Without cover. FreeTouch.
The FreeTouch® switch FT-SH-230 can be used to control any module or system that accepts a contact closure (binary input). The relay contacts are isolated from the mains voltage and can be directly connected to the module.
Once the sensor is connected and powered on, the relay can be activated by moving the hand in front of the switch. The FT-SH-230 sensor functions like a button. When the hand enters the detection area (approximately 5 cm away from the switch plate), the relay contact closes. When the hand leaves the detection area, the relay opens.
Through various materials (excluding metal), the sensor can detect the hand and reliably trigger the switching process.
Technical specifications: Capacitive sensor. Connect to N and L. 230V. Can be mounted into an existing standard EU round wall box of 68 mm, either using expansion clips or screws.
Two-way switch / Three-way switch:
Do you want to control a lamp from 2 or 3 locations? Then we're talking about a two-way switch (2 control points) or a three-way switch (3 control points).
Procedure: Install 1 FreeTouch® light switch as the "Master," product number FT-SH-230. You can connect 1, 2, or as many FreeTouch® two-way/three-way switches as "Slaves" to the Master (product number FT-X-230). Each control point behaves like the "Master" (light switch).
Important: It's not possible to connect a FreeTouch® sensor with another brand, such as a conventional rocker switch.
Please order the front panel / cover separately.
PACKAGE CONTENTS:
- 1 FreeTouch® Sensor FT-SH-230.
- Installation manual.