1P 16AX 2-way switch insert with rocker (2 modules) 

1P 16AX 2-way switch insert with rocker (1 module)

Narrow push-button insert. Anthracite matt finish. The rocker springs back when released. Suitable for downstream electronics such as relays or dimmers. Important: This is not a switch. 2 narrow inserts can be placed next to each other. 250 V 1P NO 10A - 1 module

Wide push button insert 250 V 1P NO 10A - 2 modules.

16AX 1P intermediate switch insert with rocker (2 modules) 

16AX 1P intermediate switch insert with rocker (1 module)

The modern Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with square socket cut-out.Matt high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws

The modern Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with square socket cut-out.Matt high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws

For placing next to a narrow technical insert to close the gap in the frame cut-out. This blank cover / gap filler has half the width of a socket insert.Examples of use:Technical use is placed on the left, this gap filler on the right.Technical use is placed on the right, this gap filler on the left.For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE. For installation in standard round flush-mounted boxes ø 60mm or cavity boxes ø 68mm. 

For closing a frame cut-out. Blind cover without technical function. The width of the blind cover corresponds to the width of a socket insert and completely fills the gap. For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE. For installation in standard round flush-mounted sockets ø 60mm or cavity sockets ø 68mm. 

End socket for TV, SAT, cable, FM connection. Important: This junction box is only used at the end of one or more upstream through boxes.This junction box is not suitable as a single box or as a pass-through box.For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE.Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Antenna socket for termination in an IN/OUT cabling.Connection attenuation: 10 dBFrequency band:TV: 5 - 68 und 120 - 862 MHzA: 87.50 - 108 MHzSAT: 950 - 2400 MHz5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

Infrared motion detector or switch. Switches on connected lamps as soon as a person enters the detection area. Switches the lamps off again after a preset time. Can be integrated into frames of AVE. N0 10(4)A 230V. Output relay 230V. Adjustable time from 10 seconds up to 7 minutes. Fixed lens with 2 to 12 metres detection distance and 150 degrees aperture angle. Input for push-button for remote control. Width = half socket width (1 module width). Installation options: a) Suitable for square frame with exactly fitting cut-out with 1/2 module width (1/2 socket insert width). b) When placing in a normal cut-out (socket width), place a second, narrow unit next to it if necessary. c) When placing in a normal cut-out (socket width), two quarter-width blind covers can be fitted to the left and right of the blind control.

Cable outlet with hole diameter 9 mm. Suitable for the passage of cables with a diameter of 4 to 8 mm. Clamp on the back for fixing cables. Narrow design (half socket width). Can be optionally installed in a wall socket:1 narrow product like this + gap filler2 narrow products like this or similar. Placement next to each otherFor use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE. For installation in standard round flush-mounted boxes ø 60mm or cavity boxes ø 68mm. 

Electronic thermostat with rotary knob for simple, intuitive control of the room temperature. For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE.Made in EU.Warranty: 5 years (see warranty declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Output with changeover contact 5A. NA+NC 5A (2A inductive). Temperature range from 5 to 30 degrees Celsius. 230V, 50-60 Hz.No connection for external temperature sensor.Functionality: Simple and intuitive setting of the temperature by means of a rotary wheel.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

For charging smartphones, tablets and other devices.For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE.Made in EU.Warranty: 5 years (see warranty declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Narrow design (half socket width). Can be optionally installed in a wall socket:This unit + gap filler.2 pieces of these units next to each other.This unit and another narrow unit side by side.Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.110-230V. 50-60 Hz. Maximum 3A. Standby consumption only 0.1 W.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee. 

If a narrow technical insert (for example USB charger) is placed individually in the centre, a narrow gap is created on the left and right. These two gaps are closed with two of these blind covers / gap closers. Important: Always order 2 pieces. For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE. For installation in standard round flush-mounted boxes ø 60mm or cavity boxes ø 68mm. 

Mechanical blind switch with intuitive operation:Button Up opens the blind.Push-button DOWN closes the blinds.STOP is possible at any time. A narrow roller shutter switch contains all 3 functions UP - STOP - DOWN. The pressed button latches until the other button is pressed.For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE.Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Narrow design (half socket width). Can be optionally installed in a wall socket:This unit + gap filler.2 pieces of these units next to each other.This unit and another narrow unit side by side.Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.2P, 10 A, 230 V. Latching buttons, mutually locking.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.

RJ45 junction box for data lines. For connection of network devices. Installation in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Narrow design (half socket width). Can be optionally installed in a wall socket:1 narrow unit like this + gap closer2 narrow units like this or similar side by sideInstallation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.RJ45 Cat 6.3M plug.8 contacts.Integrated sliding opening as dust protection. Top with a small labelling field5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.